Toa HY-TR1 User Manual download pdf

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

HY-TR1TRIM RING

INSTRUCTION MANUAL

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

CAUTION

• Be sure to read the instructions in this section carefully before use.

• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

• Leave the installation to your TOA dealer because the installation requires expert knowledge. Improper

installation may cause the speaker to fall, resulting in personal injury and/or property damage.

• Install the mounting hardware in a location that can structurally support the weight of the mounting hardware

and the speaker. Doing otherwise may result in the speaker falling down and causing personal injury and/or

property damage.

• Do not use other methods than specified to mount the unit. Extreme force is applied to the unit and the unit

could fall off, possibly resulting in personal injuries.

• Tighten each screw securely. Ensure that the unit has no loose joints after installation to prevent accidents

that could result in personal injury.

• Use the specified speaker in combination. Doing otherwise may cause the speaker or component to fall off,

resulting in personal injury.

• Avoid touching the unit's sharp metal edge to prevent injury.

TOA's HY-TR1 Trim Ring is used to install flush-mounted ceiling speakers in larger-than-designated mounting

holes. Using up to two HY-TR1 rings in combination with other mounting hardware allows the speaker to be

installed in mounting holes of from 200 to 300 mm (7

/8" – 11

/16") in diameter.

3. SPECIFICATIONS

2. GENERAL DESCRIPTION

1. SAFETY PRECAUTIONS

Note: The design and specifications are subject to change without notice for improvement.

Mounting Hole Diameter ø200 – ø300 mm (7

/8" – 11

/16")

Finish Surface-treated steel plate, white, paint

Dimensions ø320 mm (1.2 mm in thickness) or ø12

/32" (3/64" in thickness)

Weight 500 g

Usable Speaker F-122C, F-122CU, F-2322C, F-2352C

1 2

HY-TR1TRIM RING 1
4. INSTALLATION 2

Summary of Contents

Page 1 - HY-TR1TRIM RING

Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for futu

Page 2 - 4. INSTALLATION

Printed in Indonesia533-06-100-204. INSTALLATIONRefer to the speaker's instruction manual for information.4.1. When the mounting hole is 200 – 24

Comments to this Manuals

No comments

Toa HY-TR1 User Manual

Browse online or download User Manual for Acoustics Toa HY-TR1. Toa HY-TR1 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Acoustics Toa HY-TR1