Toa D-911 User Manual download pdf

Thank you for purchasing TOA's D-911 VCA Fader unit.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

D-911D-911 VCA FADER UNIT

INSTRUCTION MANUAL

3. BLOCK DIAGRAM

VCA

IN CH 1-6

VCA

IN CH 7-12

VCA

OUT CH 1-4

VCA

OUT CH 5-8

CTRL

IN 1-4

CTRL

OUT 1-4

CTRL

IN 5-8

CTRL

OUT 5-8

1 6

7 12

1 4

5 8

1 4

Make contact

5 – 8

Same as above

4. SPECIFICATIONS

• Accessories

Fader knob (Red, Yellow)* .............................. 3 each

Volume knob (Red)* ................................................ 2

Rack mounting screw 5 x 12 (with plane washer) ... 4

Rack mounting bracket (preinstalled on the unit) .... 2

* Convenient for color coding to distinguish

channels to which stereo link or group settings

are assigned.

Note

The design and specifications are subject to

change without notice for improvement.

Power Supply 5 V DC (supplied from the optional D-984VC)

Connector RJ45 connector x 8

Input Fader Control Input fader (100 mm) x 12

Output Volume Control Output volume control x 8

Contact Control Illuminated switch x 8

Remote Output No-voltage make contact output

(contact capacity: 30 V DC, 4 A)

Remote Switch Seesaw switch for activating the remote function

of the power distributor

Finish Panel: Pre-coated steel plate, black

(30% glossy)

Dimensions 482.6 (w) x 177 (h) x 61.3 (d) mm

(excluding projection)

Weight 2.7 kg

1. GENERAL DESCRIPTION

The D-911 VCA Fader Unit is designed to remotely control

the digital mixer with the D-984VC VCA Control Module

installed. Connecting to the D-984VC permits volume

adjustment of input and output channels and contact

controls of the digital mixer.

2. HANDLING PRECAUTIONS

• Connect the D-911 to the

D-984VC VCA Control

Module installed in the

digital mixer. Connect each

of eight terminals to the D-

984VC's terminal of the

same name by way of the

fully-connected straight cable as shown on the right.

• Use the D-901 firmware of version 3.0 or later. Firmware

versions earlier than it cannot be used in conjunction with

the fader unit.

The firmware version

number can be confirmed

on the D-901's front

panel-mounted display.

If your firmware version is

old, download the latest software program and the "D901

PC software instruction manual" from the TOA Internet

product data site [http://www.toa-products.com/]. For the

update procedure, refer to the instruction manual.

• For channels with stereo link or group settings

established at the digital mixer, only the lowest numbered

channel in the preset link or group is enabled.

• Fader position "10" of the D-911 provides the channel

gain set by the digital mixer. As a guide, knob position 8

provides about 10 dB below the gain set by the D-901.

[Connection]

1 – 81 – 8

T O A D - 9 0 1 S e r i e s

S o f t w a r e V e r 3 . 0 0

[Display example]

1 2

Summary of Contents

Page 1 - D-911D-911 VCA FADER UNIT

Thank you for purchasing TOA's D-911 VCA Fader unit. Please carefully follow the instructions in this manual to ensure long, trouble-free use of

Page 2 - 5. NOMENCLATURE AND FUNCTIONS

1. Input faderAdjusts the volume of each input equipment (i.e.microphones and CD players). Fader position "0" provides the minimum volume, a

Comments to this Manuals

No comments

Toa D-911 User Manual

Browse online or download User Manual for Equipment Toa D-911. Toa D-911 User Manual [en] [de]

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Toa D-911