Toa PJ-304 User Manual download pdf (Page 4)

7. REPAINTING THE SPEAKER

Step 1. Remove 4 screws that fix the speaker

bracket to detach the speaker cover.

Step 2. Remove 3 screws that fix the mesh net,

then raise the turndown tabs of the mesh

net to detach.

Step 3. Clean the speaker cover and mesh net.

Wipe with a soft cloth damped in a detergent.

Note

Do not use thinner or other volatile liquids to clean them as doing so may cause deformation.

Step 4. Use spray paint to apply uniform and thin coat of paint.

Notes

• Avoid painting with a roller or brush, as the mesh net could become clogged with paint.

• Use appropriate paints for the speaker cover and mesh net materials.

· Speaker cover: Fire-resistant HIPS resin

· Mesh net: Rolled steel plate (acrylic paint)

Step 5. After the paint has dried, apply another light coat.

Repeating Step 4, apply 2 or more light coats of paint. Application of one thick coat of paint all at once

may cause drips or unevenness to show up in the painted finish, or clog the mesh holes.

Step 6. After the paint has dried, replace the speaker cover and mesh net.

Follow the procedure below when repainting the speaker cover and mesh net.

Note: Never touch the inner speaker diaphragm during work.

Speaker cover

Speaker bracket

Remove 4 screws indicated by arrows.

Raise the turndown tab.

Mesh net

Remove 3 screws indicated by arrows.

533-06-155-2A

URL: http://www.toa.jp/

Traceability Information for Europe (EMC directive 2004/108/EC)

Manufacturer:

TOA Corporation

7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,

Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg,

Germany

1 2 3 4

No comments

Toa PJ-304 User Manual Page 4