Toa WA-1822C User Manual download pdf (Page 11)

9. USING THE CASSETTE DECK

(WA-1822C only)

9.1. Nomenclature and Functions

1. Cassette door

Insert the tape into the door's receptacle.

Notes

• When the power is switched ON, cassette deck

motor noise may be heard for approximately 1

second during initial setting.

• Do not subject the unit to impacts and shocks

during cassette deck operation to avoid

malfunctions.

• When operating on batteries, the cassette deck

may not function properly if the batteries begin to

lose their charge.

2. Recording button [ ] / Recording indicator

lamp (red)

Pressing this button places the deck in recording

standby mode, causing the Pause indicator lamp

to light orange, the Recording indicator lamp to

light red, and the Direction indicator lamp

(indicating which direction the tape will record) to

flash green. In this state, recording is started by

pressing either the flashing Play button (Direction

indicator lamp) indicating the tape direction or the

Pause button.

3. Fast forward/rewind buttons [ ]

Wind the tape in the forward or reverse direction

at top speed.

4. Play button [ ] / Direction indicator lamp

(green)

Plays the tape in the arrow-indicated direction.

5. Stop button [ ]

Stops tape operation.

6. Pause button [ ] /Pause indicator lamp

(orange)

Temporarily stops tape operation. Note that this

button cannot be used during fast forward or

rewind operation.

7. EJECT [ ]

Opens the cassette door to allow the tape to be

loaded or removed.

Note: Avoid pressing the EJECT [ ] during tape

operation. When removing the tape, press

the Stop button [ ] to be sure that the

tape is stopped, then press the EJECT [ ].

8. Tape counter

Indicates the amount of tape used. The counter

reading increases as the tape moves forward,

and decreases as it moves backward.

Note: The counter is reset to [0000] when the

power switch is switched off or the

cassette door is opened.

9. Reset button

Resets the counter to [0000].

10. Tape volume control

Adjusts the tape sound volume.

11. Tape speed control

Adjusts the tape speed. Tape operation is set to

normal speed when the knob marker points up.

Tape speed increases as the control is rotated

clockwise, and decreases when rotated

counterclockwise. This control can be only used

in playback mode.

Note: Irrespective of the tape speed setting, the

tape moves at normal speed after

automatically reversed.

12. Operating mode selector switch

Selects one of 3 tape operating modes: ,

, or .

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

Toa WA-1822C User Manual Page 11

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Toa WA-1822C