Toa HY-RR2 User Manual download pdf

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

HY-RR2REINFORCEMENT RING

INSTRUCTION MANUAL

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

CAUTION

• Be sure to read the instructions in this section carefully before use.

• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

• Leave the installation to your TOA dealer because the installation requires expert knowledge. Improper

installation may cause the speaker to fall, resulting in personal injury and/or property damage.

• Install the mounting hardware in a location that can structurally support the weight of the mounting hardware

and the speaker. Doing otherwise may result in the speaker falling down and causing personal injury and/or

property damage.

• Do not use other methods than specified to mount the unit. Incorrect mounting may cause the speaker to fall

off, possibly resulting in personal injuries.

• Tighten each screw securely. Ensure that the unit has no loose joints after installation to prevent accidents

that could result in personal injury.

• Use the specified speaker in combination. Doing otherwise may cause the speaker to fall off, resulting in

personal injury.

• Avoid touching the unit's sharp metal edge to prevent injury.

2. GENERAL DESCRIPTION

The HY-RR2 Reinforcement Ring is specially designed for use with the F-2352SC Ceiling Speaker System,

enabling the F-2352SC installation to a weak ceiling.

It also permits the F-2352SC to be installed to a wide range of locations in versatile mounting methods using

in conjunction with the HY-TB1 Tile Bar Bridge, HY-TR1 Trim Ring, or HY-AH1 Anchor Hanging Bracket.

1. SAFETY PRECAUTIONS

3. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Mounting Hole Diameter ø200 mm (7

/8")

Finish Surface-treated steel plate

Dimensions ø260 mm (outer diameter) x 1.2 mm thick or

ø10

/64" (outer diameter) x 3/64" thick

Weight 280 g

Usable Speaker F-2352SC

1 2

Summary of Contents

Page 1 - HY-RR2REINFORCEMENT RING

Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for futu

Page 2 - 4. INSTALLATION

Printed in Indonesia533-06-106-804. INSTALLATIONRefer to the F-2352SC speaker's instruction manual for information.4-1. Direct mounting to a weak

Comments to this Manuals

No comments

Toa HY-RR2 User Manual

Browse online or download User Manual for Acoustics Toa HY-RR2. Toa HY-RR2 User Manual [cs] [de] [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Acoustics Toa HY-RR2