Toa PJ-304 User Manual download pdf (Page 3)

6. INSTALLATION

Step 1. Secure the swivel bracket to the ceiling or wall with 3 screws.

Loosen the safety screw (for fall prevention) as shown below.

Before installation

Step 2. Mount the speaker to the swivel bracket.

Loosen the speaker fixing screws as shown below.

2-1. Pass the speaker cord through the cord entry hole in the swivel bracket.

2-2. Slip 2 speaker fixing screws into the swivel bracket's screw slots.

2-3. Tighten the speaker fixing screws and safety screw.

Before installation

Step 3. Connect the 60 cm (1.97 ft) speaker cord

to the routed speaker cable.

Step 4. Loosen the swivel bracket's butterfly nut,

adjust the speaker angle, and then

retighten the butterfly nut.

Ceiling

Swivel bracket

(accessory)

Safety screw

Tapping screw 4 x 16 (accessory)

Note

If these screws are not appropriate for the ceiling material,

separately prepare the proper screws.

Note

Loosen the safety screw until it's tip does not stick out from the bracket surface.

If the screw tip sticks out, this obstructs the insertion of the speaker bracket in Step 2.

Ceiling

Cord entry hole

Swivel bracket

Speaker

Safety screw

Safety screw hole

Speaker bracket

Speaker fixing screw

Note

Ensure that the safety screw is fit into the

given hole in the speaker bracket.

Speaker cord 60 cm (1.97 ft)

2-3

2-1

2-2

Note

These screws are pre-screwed into

the bracket at the factory.

Loosen them so that they can slip into

the swivel bracket's screw slots.

Speaker

Speaker cord 60 cm (1.97 ft)

butterfly nut

HOT (black)

COM (white)

Lead-in cable

1 2 3 4

Comments to this Manuals

No comments

Toa PJ-304 User Manual Page 3

Comments to this Manuals

Related products and manuals for Acoustics Toa PJ-304