Toa HY-0871CL User Manual download pdf

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

HY-0871CL

SPEAKER MOUNTING BRACKET

INSTRUCTION MANUAL

SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully

before use.

• Make sure to observe the instructions in this manual as

the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual

handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used

in this manual to prevent bodily injury and property

damage which could result from mishandling. Before

operating your product, read this manual first so you are

thoroughly aware of the potential safety hazards as well as

understand the safety symbols and messages.

• Install the unit only in a location that can structurally

support the weight of the unit and the mounting bracket.

Doing otherwise may result in the speaker falling down

and causing personal injury and/or property damage.

• Owing to the speaker's size and weight, be sure that at

least two persons are available to install the speaker.

Failure to do so could result in personal injury.

• Use nuts and bolts (not supplied with the unit) that are

appropriate for the ceiling's or wall's structure and

composition. If the ceiling or wall cannot withstand the

weight of both the speaker and bracket, the speaker may

fall, resulting in material damage and possible personal

injury.

• When mounting the speaker to a wall, ensure that the

entrance of the bracket's temporary-fixing slot is facing

upward. If not installed facing up, the speaker may fall

off, resulting in personal injury.

• Tighten each nut and bolt securely. Ensure that the HY-

0871CL has no loose joints after installation to prevent

accidents that could result in personal injury.

• Do not hang down from the bracket, as the speaker

system and bracket could fall, resulting in personal injury.

GENERAL DESCRIPTION

The HY-0871CL Speaker Mounting Bracket is specially

designed for mounting TOA's ES-0871 Speaker System to

a wall or ceiling.

NOMENCLATURE

INSTALLATION

1. Mount both Brackets L and R to a ceiling or wall using

four bolts for each bracket.

WARNING

Angle adjustment

slot C

Angle adjustment slot B

Angle adjustment slot A

Bracket R

Bracket L

Temporary-

fixing slot

Indicates a potentially hazardous

situation which, if mishandled, could

result in death or serious personal

injury.

Ceiling or wall mounting dimension (Unit: mm)

• When installing brackets as shown in Figure 1

742

819

898

190

300

357

592

672

748

357

300

190

Figure 1

Figure 2

• When installing brackets as shown in Figure 2

2. Out of four screws located on each of the speaker's top

and bottom panels, remove the following three (six in

total) from each panel.

Do not remove this screw.

(This nut is not used.)

Nut A (one each on top

and bottom panels)

Nut B (one each on top

and bottom panels)

Nut C (one each on top

and bottom panels)

1 2

Summary of Contents

Page 1 - SPEAKER MOUNTING BRACKET

Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for futu

Page 2 - SPECIFICATIONS

Printed in Japan133-05-318-60Note : Do not leave hexagon bolts excessively loosewhen installing them temporarily. 4. Fit the two temporarily-install

Comments to this Manuals

No comments

Toa HY-0871CL User Manual

Browse online or download User Manual for Acoustics Toa HY-0871CL. Toa HY-0871CL User Manual [en] [cs] [pl] [de]

Summary of Contents

Comments to this Manuals

Related products and manuals for Acoustics Toa HY-0871CL