Toa BG-235 User Manual download pdf (Page 3)

When Installing the Unit

• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as

doing so may result in fire or electric shock.

• Ne pas exposer l'appareil à la pluie et le protéger de tout contact avec de l'eau ou d'autres liquides afin

d'éviter un incendie ou une électrocution.

• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified

may result in fire or electric shock.

• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power

cord in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power

cord, as doing so may result in fire or electric shock.

• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.

Doing so may result in the unit falling down and causing personal injury and/or property damage.

• External wiring connected to the terminals marked with requires installation by an instructed person.

• Les câbles externes branchés aux bornes marquées de doivent être installé par un technicien

spécialement formé.

• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.

• L'appareil doit être branché à une prise d'alimentation avec mise à la terre de protection.

• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be easily

accessible.

• La prise doit être installée à proximité de l'équipement et la fiche (dispositif de déconnexion) doit être

facilement accessible.

• Use the optional Rack mounting bracket MB-25B-BK or MB-25B-J when mounting the unit(s) in an

equipment rack. Remove four M4 x 8 screws on both sides of the unit, and mount the bracket there using

the M4 x 16 screws (supplied with the bracket) instead.

• Utilisez la patte de montage en bâti en option MB-25B-BK ou MB-25B-J pour monter l'unité en bâti. Retirez

les quatre vis M4 x 8 sur les deux côtés de l'appareil, et montez la patte à l'aide des vis M4 x 16 fournies

avec la patte.

When the Unit is in Use

• Should the following irregularity be found during use, immediately switch off the power, disconnect the power

supply plug from the AC outlet and contact your nearest TOA dealer. Make no further attempt to operate the

unit in this condition as this may cause fire or electric shock.

· If you detect smoke or a strange smell coming from the unit

· If water or any metallic object gets into the unit

2. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property

damage which could result from mishandling. Before operating your product, read this manual first and

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

WARNING

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operation and maintenance (servicing) instruction in the literature accompanying the

appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral avertit l'utilisateur de l'existence

d'instructions d'utilisation et d'entretien (réparation) dans la documentation fournie avec l'appareil.

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments

Toa BG-235 User Manual Page 3

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Toa BG-235