Toa H-1 User Manual

OPERATING INSTRUCTIONSSPEAKER SYSTEM H-1Please follow the instructions in this manual to obtain the optimum results from this unit.We also recommend t

6. REPAINTING THE GRILLE AND TRIM PIECEFollow the procedures below to change the color of thegrille.1. Remove the speaker's angle adjustment scre

117. Attach the grille to the speaker with its two mountingscrews.8. Reattach the mounting bracket to the speaker with theangle adjustment screw.7. PR

*1Continuous 24 hours, band-limited pink noise (50 to 20,000 Hz)*2Pink noise (1,000 Hz to 10,000 Hz)Note: The design and specifications are subject to

21. SAFETY PRECAUTIONS• Before installation or use, be sure to carefully read all the instructions in this section for correct and safeoperation.• Be

32. GENERAL DESCRIPTIONTOA's H-1 is a cylinder-shaped, small flush-mount 2-way speaker featuring high sound quality. 3. FEATURES• The H-1 Speaker

44. NOMENCLATURE3124612654 12244287.2255.6 (10 1/10") (For mounting to an electrical box)254 (10") (For mounting to an electrical box)230.8

55. INSTALLATION5.1. Direct Wall/Ceiling Mounting Without Using an Electrical BoxStep 1. Adapter Panel mounting1-1. Using the supplied hole pattern sh

61-4. Clamp the wall or ceiling panel using the two boardclamps, and secure with the clamp screws.Step 2. Wiring and impedance changes2-1. Pull the ca

72-4. Attach two impedance selector sockets to theconnector to select the desired impedance. Preset to830 Ω (12 W for 100 V line and 6 W for 70 V line

83-2. Loosen the angle adjustment screws. After adjustingthe angle, retighten the screws.TipThe mounting angle can be adjusted for up to ±45°.Since th

95.3. Mounting the Speaker Directly to an Electrical BoxThe H1 speaker system can also be mounted directly to an electrical box*. Follow Steps 2 and 3