Toa HX-7W-WP User Manual

OPERATING INSTRUCTIONSSPEAKER SYSTEMS HX-7BHX-7WHX-7B-WPHX-7W-WPThank you for purchasing TOA’s Speaker Systems. Please carefully follow the instructio

10 Step 2. Using the supplied bolts, tighten the suspension brackets together with the side angle plates. Attach the brackets with the suspension hole

11 Step 3. Suspend the speaker system at 3 points using appropriate commercially obtained wires, chains, or anchor shackles.Observe the following inst

129. OPTIONAL MOUNTING BRACKETS9.1. Types of Mounting BracketsThe following mounting brackets are optional. For usage, refer to the instruction manual

139.2. Installation ExamplesAngle Adjustment BracketHY-60DBHY-60DWHY-60DB-WPHY-60DW-WPSpeaker Wall Mounting BracketHY-MS7B-WPHY-MS7W-WPSpeaker Rigging

1410. SAFETY WIRE INSTALLATIONBe sure to always use safety wire when installing speaker systems.NoteSafety wires, shackles, and other suspension parts

1511. EQUALIZATION USING A DIGITAL SIGNAL PROCESSORThespeakersystemsaretoreproducewide-band,high-efciencysoundevenwithouttheuseofanequ

16• Filter characteristics when used with the FB-150 series Subwoofer SystemNoteWhen using the processor with the HX-7 Series and the FB-150 Series, e

1712. COMBINATION WITH THE MATCHING TRANSFORMERUsing the optional MT-200 Matching Transformer allows the speaker system to be connected to a high-impe

18ModelNo. HX-7B-WP HX-7W-WPEnclosure Sealed typePower Handling CapacityContinuous pink noise: 250 W (IEC60268-5: 350 W)Continuous program: 750 WR

2TABLE OF CONTENTS1. SAFETY PRECAUTIONS ... 32. GENERAL DESCRIPTION ...

URL:http://www.toa.jp/133-01-00032-01Traceability Information for EuropeManufacturer:TOA Corporation7-2-1,Minatojima-Nakamachi,Chuo-ku,Kobe,Hyog

31. SAFETY PRECAUTIONS• Beforeinstallationor use,besure tocarefully readalltheinstructions inthis sectionforcorrectandsafeoperatio

4component to fall off, resulting in personal injury.• Do not mount the speaker in locations exposedto constant vibration. The mounting brack

54. NOTES ON OUTDOOR INSTALLATIONS (HX-7B-WP and HX-7W-WP only)Only the HX-7B-WP and HX-7W-WP are suitable for installation under the eaves. For insta

66. INPUT SECTION6.1. HX-7B and HX-7W• The2Speakonconnectorsareinternallyconnectedinparalleltothescrewterminals;youcanuseeitherone.•

76.2. HX-7B-WP and HX-7W-WPConnect the speaker cable to the screw terminal using the supplied terminal cover and rubber gasket.HX-7B-WP/7W-WPRearInput

87.2. Changing the Directivity Angle to Between 15° and 45° ModesBeforechanginganglemodes,layoutaprotectivesheet,corrugatedcardboardorothe

97.3. Changing the Directivity Angle to 60° ModeOptional brackets are required to change to 60° mode.Select the brackets that correspond to the speake