Toa C-RM700 User Manual download pdf (Page 28)

7.3.2. When the password has been set

Note, however, that the password setting differs from those explained here. Refer to p. 47.

1. Press the Menu key for 3 seconds or more.

The password entry screen is displayed.

2. Enter the password (4 digits) using the numeric keypad.

3. Press the SET key.

If the entered password is correct, the menu screen is

displayed.

[Some operation examples]

4. Tilt the joystick up or down to select the setting item.

5. Press the SET key to confirm the setting item.

The current setting contents (if not set, the factory-

predetermined setting contents) are displayed at the

lower part of the LCD screen.

In this event, one character "1" of the setting contents

flashes. (The flashing character differs depending on

the content.)

6. Tilt the joystick left or right to select the desired setting

content.

Note

Pressing the Clear key before Step 6 is completed will

return the display to the screen last shown (in Step 4)

before the SET key was pressed without storing the

setting contents.

7. Press the SET key to confirm the setting contents.

The display returns to the screen (in Step 4) to select

the setting item.

8. Repeat Steps 4

7 to continue to set other items.

Press the Menu key again when returning to the normal

screen after setting completion.

1 234

(

Example

)

PASSWORD

1234

PASSWORD

LCD screen

Press for 3 seconds

or more.

SET

OPERAT I ON MODE

AUTO RETURN

(

Example

)

SET

AUTO RETURN

1.ON

AUTO RETURN

1.ON 10SEC

SET

AUTO RETURN

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Comments to this Manuals

No comments

Toa C-RM700 User Manual Page 28

Comments to this Manuals

Related products and manuals for Safety Toa C-RM700