Toa C-RM700 User Manual download pdf (Page 7)

4. CONNECTABLE EQUIPMENT AND THEIR MAXIMUM NUMBERS

4.1. About Controllable Equipment by the C-RM700

Shown below are equipment that can be controlled by the C-RM700.

Camera

[Communication method: Type A]: C-CC504, and C-CC554

[Communication method: Type A/B]: C-CC514, C-CC564, C-CC574, C-CC704, C-CC714, C-CC764, and

C-CC774

Up to 16 each of camera can be connected to the camera control terminals and controlled.)

Switcher: C-MS91D, C-MS91S, C-MS161D, and C-MS161S

Only one switcher can be connected for remote camera control.

4.2. About the Camera Control Terminal

The Camera control terminal is used to connect the Combination Camera or the C-IF500 Interface Unit. Up to

16 cameras can be connected to this terminal.

After connection completion of all cameras, turn on the power of cameras and the C-RM700, and initialize the

cameras. Then be sure to perform camera check after the camera's initialization operation has been

completed. (Refer to p. 31, "Camera Check.")

About the Descriptions in This Manual

• The explanations in this manual assume that the C-RM700 Remote Controller (this unit) is connected to

a C-MS161D/S or C-MS91D/S Multi-Switcher.

• Camera number: Refers to the camera input terminal number connected to the switcher.

• Position number: Combination camera orientation can be programmed for No. 1

255.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

No comments

Toa C-RM700 User Manual Page 7