Toa C-RM700 User Manual download pdf (Page 38)

7.4.14. Sensor alarm

Select "1. ON" to use the Alarm input terminal (such as the C-AL80 and camera alarm).

1. Press the Menu key for 3 seconds or more to display the menu screen.

2. Tilt the joystick up or down to select "SENSOR ALARM," and confirm the selection with the SET key.

The setting will appear on Line 2.

3. Tilt the joystick to the left or right to select either of the following settings, and confirm it with the SET key.

[Setting contents]

SENSOR ALARM

1.ON

1. ON

Uses when receiving alarm signals from the alarm input terminal.

2. OFF

Alarm signals are not received from the alarm input terminal.

7.4.15. Camera alarm

Select "1. ON" to use the Combination camera's alarm contact input.

1. Press the Menu key for 3 seconds or more to display the menu screen.

2. Tilt the joystick up or down to select "CAMERA ALARM," and confirm the selection with the SET key.

The setting will appear on Line 2.

3. Tilt the joystick to the left or right to select either of the following settings, and confirm it with the SET key.

[Setting contents]

CAMERA ALARM

1.ON

1. ON

Uses the Combination camera's alarm contact input.

2. OFF

Does not use the Combination camera's alarm contact input..

Note: This selection is set to "2. OFF" by the factory.

Note

When alarm settings and alarm report settings are performed on the camera, set the report settings of the

alarm contact number to be used to ON.

Note: This selection is set to "2. OFF" by the factory.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Toa C-RM700 User Manual Page 38