Toa C-RM700 User Manual download pdf (Page 44)

7.4. 22. Abbreviation

By merely pressing the preprogrammed abbreviated number (numeric keypad entry and SET key), the

camera image (camera number and position number) can be displayed on the monitor.

Up to 255 camera numbers or camera/position numbers can be set. (The abbreviated number provides the

same function as the "Function.")

1. Press the Menu key for 3 seconds or more to display the

menu screen.

2. Tilt the joystick up or down to select "ABBREVIATION,"

and confirm the selection with the SET key.

The settings are displayed on Line 2, and the unit switched

to Abbreviation number Entry Waiting mode.

3. Tilt the joystick to the left or right, or use the numeric

keypad to enter the designed abbreviated number and

confirm the setting with the SET key.

Enter a number from 1

520. The flashing cursor moves to

the camera number.

4. Enter the camera number using the numeric keypad, and

confirm it with the SET key.

Enter a number from 1 to 16. The flashing cursor moves to

the position number.

5. Enter the position number with the numeric keypad, and

confirm it with the SET key.

Enter a number from 1 to 255.

Note

Entering "0" will switch the screen to full-screen display,

and will not execute position playback.

[Setting the camera's alarm contact output (close)]

After confirming the camera number and position number, the

flashing cursor will move to the alarm contact output selection

indication on the rightmost position in line 2.

6. Tilt the joystick to the left or right to select either [ ] (space)

or [

], and confirm the selection with the SET key.

For the camera equipped with 2 auxiliary contact outputs, if

[

] is selected, the camera's auxiliary contact output 2 can

be set to close when the alarm signals are input to the set

abbreviation number camera.

7. Repeat Steps 3

6 to continue setting other abbreviated

numbers. Press the Clear key to return to the setting item

display.

[Deleting Settings]

After pressing the Alarm reset key, press the SET key.

ABBREV I AT I ON 1

CAM POS

Abbreviated

Nos. (1 - 520)

Position No.

Camera No.

1 8

SET

(

Example

)

SET

(

Example

)

ABBREV I AT I ON 1

CAM POS

ABBREV I AT I ON 1 8

CAM POS

ABBREV I AT I ON 1 8

CAM2 POS

1 1 6

SET

(

Example

)

ABBREV I AT I ON 1 8

CAM2 POS 1 1 6

SET

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Comments to this Manuals

No comments

Toa C-RM700 User Manual Page 44

Comments to this Manuals

Related products and manuals for Safety Toa C-RM700