Toa HX-5W-WP User Manual download pdf (Page 14)

12. MOUNTING ON A POLE

The speaker can be mounted on a pole using the optional SP-131 Speaker Mounting Bracket in conjunction

with the YS-60B Mounting Band and HY-WM1WP Speaker Mounting Bracket. Before installing the SP-131 on

a pole, attach it to the rear plate of the speaker system.

For the mounting procedures on a pole, refer to the instruction manuals attached to the SP-131 and YS-60B.

When installing the speaker, follow the precautions below. Doing

otherwise may result in the speaker falling down, causing personal injury.

• The SP-131 mounting hardware is comprised of 2 brackets. Be sure to

use both brackets and 2 mounting bands. Securely tighten the bands,

making sure that they firmly hold the brackets.

• Take measures to prevent the bolts or nuts from unscrewing or

loosening.

WARNING

12.1. Vertical Speaker Mounting

SP-131 Speaker Mounting Bracket (optional)

Washer*

* Supplied with the SP-131

Nut*

Bolt*

HY-WM1WP Speaker

Mounting Bracket (optional)

SP-131

HY-WM1WP

YS-60B

Pole

[Example of pole mounting]

For the mounting procedures, refer to the instruction

manual attached to the HY-WM1WP.

Note

Install the speaker so that all speaker modules face

downward from the horizontal axis. Doing otherwise

could adversely affect the speaker's weather

resistance and possibly lead to malfunction or failure.

12.2. Horizontal Speaker Mounting

SP-131

YS-60B

Pole

[Example of pole mounting]

SP-131 Speaker Mounting Bracket (optional)

Washer*

* Supplied with the SP-131

Nut*

Bolt*

Rear plate

Change the factory preset position of the rear plate

as shown at left.

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Toa HX-5W-WP User Manual Page 14

Comments to this Manuals

Related products and manuals for Acoustics Toa HX-5W-WP